Tenergy TB6 Balancing Charger for NiMH/NiCD/Li-PO/Li-Fe/SLA

Seller product description

The Best ALL-IN-One Universal Charger in the Market Tenergy "Octopus" Multi Charging Harness Also Incuded ($10.99 value added FREE!)Supports the following connector types TraxxasTamiyaMini Tamiya (for Airsoft packs) JSTHitec EC3 DeansSupports multiple types of battery packs with one single charger! The follow packs are supported NiMH/NiCD 1~15 cells ( 1.2v to 18v) Li-PO/Lithium Ion 1~6 series ( 3.7v to 22.2v) Li-Fe 1~6 series Sealed Lead Acid (SLA)Charger Specifications Handle NiMH, NICD, Li-Po,Li-ion, Li-Fe, SLA BatteriesBuild-in BalanceTemperature SensorDC 11V~15V, which can be directly connect to Automobile Battery. The working electric current is less than 5A when it is charged in full load. The current of the fuse is 10A which could prevent short circuit. You can also select a extra Wall Plug AC-DC12V/5A Switching Power as a power source. SpecificationOperating voltageDC 11~18 volts AC 100~240V, 50/60HzCharge/discharge powermax. 50/5 WattsNiCd/MH1~15 cellsLiIo/LiPo/LiFe1~6 seriesPb2~20VCharge current0.1 to 5.0ADischarg current0.1 to 1.0ANo. of cycle1 to 5 timesBattery data memoryup to 5 dataWeight1000gDimension160x120x40 mmUser's setting-up parametersBattery voltage typeLiIo:3.6V, LiPo:3.7V, LiFe:3.3VNiCd Delta-peak voltage sensitivity1 to 20mVNiMH Delta-peak voltage sensitivity1 to 20mVBattery temperature cut-off20 to 80C or OFFWaiting time between charge/discharge1 to 60 min.Integral timer limit for safety10 to 720 min.or OFFMaximum charging capacity limit for safety10 to 9990mAh or OFFKey beep and buzzer soundON/OFFInput DC power low alert10 to 11VOptimized operating software When charging or discharging, TB6 has an 'AUTO' function that sets the feeding current or the cell count of the battery automatically. Especially for Li-ion/Li-Polymer batteries, it can prevent the over-charging can lead to an explosion by users fault. Every program in the unit is controlled with mutual links and communication for every possible error so it introduces a maximum safety. These can be set at users option. Dual input powerTB6 employs the circuit that can be operated with the input power of AC(Alternating Current) or DC(Direct Current). For AC input, it contains a AC-DC switching power supplier which has 5A of power capacity and maximum output power of 50Watts for charging. As a result it can charge up to 16 cells of NiCd/NiMH and 6 series of Li-ion/Li-Polymer batteries with maximum current of 5.0A. Individual voltage balancer for Li-ion/Li-Polymer batteries insideTB6 has an individual-cell-voltage balancer inside. So it does not need any balancer separately when charging Li-ion/Li-Polymer batteries LiIo/LiPo/LiFe for cell voltage balancing.Balance individual cells on dischargeTB6 also can monitor and balance individual cells of the battery pack during the discharge process. If the voltage of any one cell varies abnormally, the process will be stopped with the error message. Accept various types of batteryTB6 can accept three types of bat